110kv Composite Cross-Arm Polymer Insulator

• Application: High-voltage
• Material: Composite Polymer
• Structure: Pin Insulator
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: FS110/10
• Type: B Type Insulator
• Usage: High Voltage Power Transmission, Insulation, Electrical Installation
• Connection Method: Trough Type
• Size of Bearing Capacity: 10kn
• Certification: ISO9001
• Color: Red
• Brand: Qiupu
• Rated Voltage: 110kv
• Insulatin Distance: 1070mm
• Creepage Distance: 3988mm
• Frequency Withstand Voltage: 230 Kv
• Transport Package: Wooden
• Specification: 1296mm
• Trademark: QIUPU
• Origin: Cn
• HS Code: 8504311000
• Production Capacity: 500000PCS/Year
• Package Size: 1500.00cm * 35.00cm * 35.00cm
• Package Gross Weight: 22.000kg

Product Description

         1.Support insulators comply with the technical conditions of GB8287.1 and GB12744, as well as with the requirements of the international standard IEC 168, "Testing of inner and outdoor ceramic or glass support insulators with nominal voltage above 1000 volts" and IEC publication IEC 815, "Guidelines for the use of insulators in filthy conditions".
        2. Insulator high mechanical strength, small dispersion, safe and reliable operation.
        3. Insulator good mechanical performance at low temperature.

Insulator's anti-fouling performance mainly depends on the structure of the product and the shape of the umbrella skirt. Much work has been done in this area. Through the design optimization, artificial pollution test optimization and natural pollution test optimization, finally determined the umbrella skirt of the insulator with angle under the umbrella and the umbrella. An insulator with a rated voltage of 126kV, 252kV bending and breaking load of not less than 12kV and a climbing electrical ratio of 25 mm/kV, developed by the umbrella skirt, can withstand the highest operating phase voltage for a long time at 0.12 mg/2 salt density, i.e. the climbing electrical distance of insulator III, and can withstand the pollution of the IV salt equivalent. An insulator with a rated voltage of 550kV with a crawl ratio of 25 mm/kV can operate for long periods with 0.06 mg/kg and 2 grade salt density. Insulator's pollution resistance level is the leading in China, it tolerates the equivalent of salt density higher than the same climbing distance, isometric umbrella skirt of the same product one third.
      4.The test results of resistance voltage to artificial fouling by the Northeast Power Test Institute show that the creep ratio is 1/3 .The test results of artificial fouling resistance voltage of the NETS showed that the maximum tolerance value of the insulator was 0.25 mg/kg / kV.